■
METAL BLADE USAGE
NOTE
Choose a suitable recommended cutting attachment
according to the object to be cut.
WARNING
•
When sharpening, removing, or reattaching
the blade, be sure to wear thick, sturdy gloves and
use only proper tools and equipment to prevent
injury.
1.
Check the bolt to fasten the blade and be sure
the bolt has no fault, and no abrasion.
2.
Be sure that the blade and the holder have
been fastened according to instruction and the
blade turns smoothly without abnormal noise.
WARNING
•
The rotating parts fastened incorrectly may
cause serious accident to the operator.
•
Make sure that the blade is not bent, warped,
cracked, broken or damaged.
•
If you find any error to the blade, discard it
and change new one.
•
By using the harness, hang the unit on your
right side. Adjust the harness length so that the
cutting head may become parallel to the ground.
WARNING
•
Make sure to use harness and cutting
attachment guard. If not, it is very dangerous
when you slip or lose your balance.
■
CUTTING METHOD
(a)
Use the front left side cutting.
(b)
Guide the blade from your right to left with it
tilted slightly to your left.
(c)
When mowing a wide area, start working
from your left end to avoid interference of
cut grass.
(d)
The blade may be seized by weeds if the
engine speed is too low, or the blade cuts too
deep into weeds. Adjust the engine speed
and cutting depth according to the condition
of object.
WARNING
•
If the grass or other object gets caught in the
blade, or if the unit starts to shake or vibrate,
turn off the engine and check the whole unit.
Change the blade if it has been damaged.
•
Turn off the engine and make sure the blade
has completely stopped before checking the
blade, and removing any object got caught in.
