Installation instructions
www.dormakaba.us
76019012 02/18
REHAND LATCH:
PULL PLUNGER AND
ROTATE 180°.
NOTE:
THREADED HOLE MUST FACE
INSIDE OF DOOR.
(2) COMBO SCREWS
#8-32 X 3/4"
1.3
Secure latch to door
1.4
Secure lever to door
Fig 3
Fig 4
1.3.1 Rehand latch if necessary.
1.3.2 Secure latch to door using
included fasteners.
1.4.1 Slide spindles into both sides
of the latch.
1.4.2 Install inside and outside lever
assemblies through door.
1.4.3 Secure with included
fasteners.
1.4.4 Slide rose over inside lever
and secure with included pin.
(2) SCREWS
#10-32 X 1"
SPINDLE
SPINDLE
INSIDE ROSE
INSIDE
LEVER
ASSEMBLY
OUTSIDE
LEVER
ASSEMBLY
PIN
Fig 1
2 Dummy trim installation
LOCK
℄
13/16"
[21]
13/16"
[21]
SINGLE
1" HOLE [25.4]
1/4" DEEP [6.4] MIN.
THIS SIDE
(2) 5/16" [7.9]
THRU HOLES
2
8
6
5
7
1 - INSIDE LEVER ASSEMBLY
2 - OUTSIDE LEVER ASSEMBLY
3 - MOUNTING SCREW (DOUBLE)
4 - ROSE
5 - MOUNTING SCREW (SINGLE)
6 - FLAT WASHER
7 - CUP WASHER
8 - CAP
2
1
3
DOUBLE
1" HOLE [25.4]
1/4" DEEP [6.4] MIN.
BOTH SIDES
(2) 5/16" [7.9]
THRU HOLE
4
Fig 2
