TABLE OF CONTENTS
SKYFOLD CLASSIC, ZENITH AND MIRAGE RETRACTABLE WALLS
16
SKYFOLD WALLS IN OPERATION
The time required for a Skyfold wall to ascend or descend varies depending on the size
of the wall. On average, a Skyfold wall takes approximately two (2) minutes to either
completely travel upwards or downwards.
OPER ATING A SK YFOLD WALL
The following procedures apply to normal operating situations.
Warning
➢
Two operators, one per switch on both sides of the wall, are required for the
duration of the wall’s operation.
➢
Do not place objects between the panels, underneath the Skyfold wall, or in
the near vicinity of the Skyfold wall as this can damage the Skyfold wall when
it is in motion.
➢
Skyfold walls could pose a pinching and/or crushing hazard. Do not operate
your Skyfold wall with persons or objects in the path or immediate vicinity
of the Skyfold wall and ensure that both sides of the Skyfold wall are clear
of obstructions.
➢
In case of a malfunction, do not operate the Skyfold wall or attempt to repair it.
Call your authorized local Skyfold dealer for service.
➢
Do not operate your Skyfold wall if it is making any abnormal noises or if the
Skyfold wall does not appear to be working properly. Contact your authorized
local Skyfold dealer immediately.
➢
Do not operate your Skyfold wall if a panel is loose or displaced from its normal,
securely fastened position.
➢
Do not operate your Skyfold wall if panels are missing as this can damage
the system.
➢
Heat generated by lights inside the ceiling pocket can damage the panels.
Lights that are located in the Skyfold ceiling pocket must be turned on only
when the wall is completely down and never when the wall is partially or fully
retracted into the pocket.
➢
When an obstruction causes the Skyfold wall to halt its descent, it will auto-
reverse for three (3) seconds. You must clear the obstruction prior to resuming
the wall’s descent.
➢
It is prohibited to use your Skyfold wall(s) to lift material, objects and/or persons
