background image

dormakaba Deutschland GmbH 
DORMA Platz 1 

58256 Ennepetal  Germany T: +49 2333 793-0  F: +49 2333 793-4950 

www.dormakaba.com

Tr

anslation o

the original documen

t, subjec

to change 

witho

ut no

tic

e

5  Disassembly and disposal

Disassembly is carried out in the reverse order of 
mounting and must be carried out by qualified 
personnel. 

The product must be disposed of in an 
environmentally friendly manner. Electro-
technical parts and batteries must not be 
disposed of as domestic waste. Dispose of 

electrotechnical parts and batteries in the designated 
acceptance and collection points. Refer to the 
statutory regulations for your country.

Содержание SIO-DR

Страница 1: ...efore touching a component 2 Safety 2 1 Intended use The SIO DR module is used to connect analog switch contacts to the dormakaba system bus Messages are output via contacts or control signals are read in 2 2 Personnel qualification Mounting may only be carried out by persons authorized by dormakaba 3 Product description The SIO DR module is a DCW component Status messages are output potential fre...

Страница 2: ...ormation Supply voltage 24 V DC 15 Power consumption Quiescent current Relay For each active relay the current consumption increases by approx 11 mA 7 mA Relay 1 active 18 mA Relay 1 2 active 29 mA Relay 1 2 3 active 40 mA Relay 1 2 3 4 active 51 mA Ambient temperature 10 C to 55 C Rel humidity up to 93 non condensing Protection class dependent on the housing used Inputs In 1 to In 4 optocoupler C...

Страница 3: ... 4 are assigned to the corresponding door addresses 1 to 4 X504 Out 3 Out 4 Contact load capacity 24 V 1 A Contact load capacity 24 V 1 A Emergency button pressed Locked X506 In 1 In 2 Optocoupler 5 28 V AC DC Optocoupler 5 28 V AC DC Temporary unlocking Ü1 Long term unlocking Ü1 Parameterizable via TMS Soft In multi door systems In 1 to In 4 are assigned to the corresponding door addresses 1 to 4...

Страница 4: ...osal Disassembly is carried out in the reverse order of mounting and must be carried out by qualified personnel The product must be disposed of in an environmentally friendly manner Electro technical parts and batteries must not be disposed of as domestic waste Dispose of electrotechnical parts and batteries in the designated acceptance and collection points Refer to the statutory regulations for ...

Отзывы: