dormakaba RTS88 Package 26 with Slotted Angle Bracket
Installation Instructions
08279471
02-2020
RTS88 Closers
3
Frame
Closer
1.1 Prepare frame and install closer
1
Installation instructions
Fig.1
1.1.1
Prepare header and side jamb according to
template.
1.1.2
Fasten mounting bracket to side jamb with
three No. 8-32 pan head machine screws.
1.1.3
Fasten header to mounting bracket with two
No. 10-32 flat head machine screws.
1.1.4
Fasten angle bracket to closer with two hex
head machine screws and flat washers.
1.1.5
Install 2 fillister head machine screws into
mounting tabs on closer; make approximately 3
turns.
1.1.6
Install closer into header by inserting
mounting tabs into mounting bracket.
1.1.7
Raise end of closer with angle bracket.
1.1.8
Fasten angle bracket with the two 1/4-20 pan
head machine screws.
1.1.9
Closer should remain centered in header.
1.1.10 Tighten the 2 fillister head machine screws
securely.
1.1.11 Install cover plate by sliding tab into frame.
1.1.12 Fasten opposite end to mounting bracket with
two No. 8-32 flat head machine screws.
Header
Side
jamb
Mounting
bracket
Angle bracket
Fillister head
machine
screws (x2)
Closer
Cover plate
90
105
