background image

1  About this manual

1.1  Information about the 

manual

This instruction is part of the product. The instruction 
comprises important instructions for safe operation. 
Therefore, this instruction must be read carefully 
before using this product. This instruction must be 
kept during the life span of the product and must be 
passed on with it. This instruction describes the 
mounting, start up, maintenance and disassembly of 
the slide rail systems GSR XEA BG and the slide rail 
system GSR‑EMF XEA BG. The text of the instruction 
is supported by the illustrations in a separate picture 
part. The chapter numbers in the text are top left in 
the illustration in the picture part. Not every chapter 
in the text is supported by an illustration in the picture 
part. The illustrations show the mounting for the 
active leaf DIN‑R. Please proceed mirror‑inverted with 
the active leaf DIN‑R.

1.2  Target groups

The mounting, start up, maintenance and disassembly 
of the slide rail system must only be carried out by 
skilled personnel that is authorized by dormakaba. 
The operating of the slide rail system can be carried 
out by any person who is mentally and physically able.

1.3  Provided documents

•  Mounting instructions
Additionally with GSR‑EMF XEA BG:
•  Data sheet about the use of catching devices

1.4  Symbols and abbreviations 

used

1.4.1  Safety instructions

WARNING

This statement indicates a situation of 
potential risk, which could lead to death or 
serious injury if not averted.

ATTENTION

This statement indicates a situation of 
potential risk, which could lead to damage 
to property or the environment if not 
averted.

1.4.2  Further labeling

2.

1.

Step‑by‑step graphics

1

2

Position numbers for parts

Illustration shows mounting directly 
onto the door lintel

Illustration shows mounting option with 
mounting plates

Illustration shows mounting option with 
lintel casing angle

1.4.3  Tool symbols

Tape measure

 Saw

Allen wrench,  
e.g. wrench size 3

1.5  Glossary

End switch ‑ releases fixed leaf if  

 

active leaf is shut. 

EMF 

Electromechanical locking device 

Active leaf 

GSR 

Slide rail door coordinator

RMZ 

Smoke detection panel

Fixed leaf

TS  

Door closer

2

GSR XEA BG/GSR-EMF XEA BG

2017-10

dormakaba Mounting instructions

WN 059385 45532

About this manual

Содержание GSR XEA BG









Отзывы: