Terminal 96 00
Quick Guide
2/4
04044303 - 06//2019 - DRAFT
WLAN (optional)
•
According to IEEE802.11 a/b/g/n (2.4 GHz + 5 GHz)
•
Encryption: WPA2-PSK
Mobile radio (option)
•
UMTS 900/2100 MHz (dual band)
•
GSM 850/900/1800/1900 MHz (dual band)
Power supply
PoE (Power over Ethernet)
Power supply of the terminal via the 8-wire Ethernet cable (max.
100 m)
•
According to IEEE802.3at
•
PD type 1
•
Performance class 0 (0.44-12.95 W)
•
Supported feed processes: Spare pair feed and phantom feed
Reader
Depending on the version, the terminal supports the following RFID
readers:
•
MRD - LEGIC prime/advant, MIFARE Classic/DESFire
•
HID - iCLASS SE, iCLASS, Prox
Booking via Smartphone (optional)
The following technologies are supported:
•
NFC (Android Smartphone)
•
Bluetooth Low Energy (Android Smar iPhone)
Ambient conditions
Ingress protection according to IEC 60529
•
IP20
•
IP65 (with optional cable sealing)
Relative humidity
•
5% - 85%, non-condensing
Ambient temperature
•
-25 °C – +55 °C (operation)
•
-25 °C – +70 °C (storage)
Dimensions
•
Width: 89 mm, height: 177 mm, depth: 32 mm
Conformity
This product complies with the standards
EN 62368-1:2014
EN 300 330 V2.1.1
EN 301 489-1 V2.2.0
EN 301 489-3 V2.1.1
EN 62311:2008
according to the provisions of the EU directives
2014/35/EU
- Low Voltage Directive (LVD)
2014/30/EU
- Electromagnetic Compatibility Directive (EMC)
2014/53/EU
- Radio Equipment Directive (RED)
RoHS
This device complies with the regulations of Directive
2011/65/EU.
You can download the original declaration of conformity in
PDF format at
In addition, the product also complies with the following standards
UL62368-1:2014
CAN/CSA-22.2 No. 62368-1:2014
FCC Code of Federal Regulations,
FCC Part 15 Class C
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
•
This device may not cause harmful interference.
•
This device must accept any interference received, including in-
terference that may cause undesired operation.
Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to oper-
ate the equipment.
Model Name: 9600-K6 MRD
FCC ID: NVI-KT9600K6L
IC: 11038A-KT9600K6L
Model Name: 9600-K6 MRD 3G
FCC ID: NVI-KT9600K6L3G
IC: 11038A-KT9600K6L3G
Model Name: 9600-K6 MRD WiFi
FCC ID: NVI-KT9600K6LWL
IC: 11038A-KT9600K6LWL
Model Name: 9600-K6-HID
FCC ID: NVI-KT9600K6H
IC: 11038A-KT9600K6H
Model Name: 9600-K6-HID 3G
FCC ID: NVI-KT9600K6H3G
IC: 11038A-KT9600K6H3G
Model Name: 9600-K6-HID WiFi
FCC ID: NVI-KT9600K6HWL
IC: 11038A-KT9600K6HWL
Device structure
The product consists of the terminal housing (1) and the mounting
plate (2).
The mounting plate (2) is the wall-mounting element of the device.
The terminal (1) is hung into the mounting plate (2) and secured
with two screws (4) from below.
The network cable is led to the terminal from the rear. The network
connection is located on the rear of the terminal.
The product has a magnetic sabotage contact (3). The terminal
software uses it to detect when the housing is removed from the
mounting plate and generates an alarm record.
Installation
Mounting height
Recommended mounting height 140 cm to the top edge of the ter-
minal.
The mounted height for the terminal should not be higher than 2
meters.
