DORMA USA, Inc.
Dorma Drive, Drawer AC
Toll-Free: 800-523-8483
E-mail: [email protected]
08279211 05/14
Reamstown, PA 17567
Fax:
800-274-9724
Subject to change without notice
TABLE OF CONTENTS
—
Technical specifications
Note
1.
Drawing is not to scale.
2.
Dimensions are in inches/[mm].
3.
Left hand door is shown.
4.
Caution: sex nuts are required for attachment of
components to unreinforced doors and to wood or
plastic faced composite type fire doors, unless an
alternative method is identified in the individual door
manufacturer's listings.
5.
Template is for 4-1/2 x 4-1/2 butt hinges & 3/4" offset
pivots
6.
Maximum door opening degree is 110°.
7.
Minimum door with 26".
Templates
Closer overall
Technical specifications
Door templates
2
Size selection chart
2
Closer setup
Exploded parts list
Handing of the door
3
A. Installing the surface closer
Installing back plate & angle bracket
Installing the surface closer
4
B. Adjustments
Adjusting the closing speeds
Adjusting the spring force
6
Adjusting the optional hold open
7
C. Installing the closer cover
Installing the cover
7
Contents
NOTE: Refer to the included drawings for push side door closer, back plate mounting templating.
NOTE: Refer to the included drawings for push side track, angle bracket mounting (soffit mount) templating.
Size selection chart
8.
Hold open range is from 55° to 105° with optional hold
open kit.
9.
Use closer body style "G" for this installation.
10.
Arrows on closer mounting plate point upward.
Door Width
Closer
Interior/
Exterior
2'-6"
min.
3'-0"
max.
3'-6"
max.
4'-0"
max.
4'-6"
max.
5'-0"
max.
TS9315
Interior
Exterior
TS9356
Interior
Exterior
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
