Important Installation Instructions
Compliance with Safety Standards
1. Carefully Read And Follow All Installation Instructions
2. Always disconnect the power supply before servicing.
3. After installation and adjustment, the installers final responsibility is to properly
Instruct the owner in the safe use of the door. He must also present the owner
With the ED700 Owner’s Manual and carefully explain how to perform the Daily
Safety Check.
4. Save These Instructions for Future Reference
Your door system was designed to the latest operating and safety standards. In
Order to ensure the continued safe operation of your door, it is important that:
- Your door system be maintained in compliance with the standards of the industry,
BHMA/ANSI 156.19.
- Proper decals and labels to be applied, per BHMA/ANSI standards, and maintained
On your doors.
Suggested Tools:
Screwdrivers
Small straight flat blade-for small terminals
#2 Phillips (cross point)
#3 Phillips (cross point)
Wrench / Sockets
9/16” Socket for arm attachment
1/2” Wrench / Socket
7/16” Wrench / Socket
3/8” Wrench / Socket
Electric Drill / Screwgun
Various bits 1/8”, 7/32”, 1/4”, 3/8”, 1/2”
1’ Holesaw
Countersink
Level
Step Ladder
Tape Measure
Electrical Wire Strippers / Cutters
Various Wire Nuts
ED700
Low Energy
Automatic Swing Door
DORMA
3
DORMA AUTOMATICS, Inc.
924 Sherwood Drive
Toll-Free: 877-367-6211
Lake Bluff, IL 60044
Fax: 877-423-7999
DL3038-010 Rev. B
6
/08
E-mail:
Subject to change without notice
