D'Orly RH Series, Руководство пользователя

Страница: 9 / 11

WARNING!
Potential hazard that could result in serious injury or loss of life.
5. Maintenance
Disconnect the tool from the compressor before adjusting, clearing jams, servicing &maintenance, relocating
and during non operation.
Regular lubrication, if your tool without using the in-liner automatic oilier, place 2 or 6 drops of pneumatic
tool oil into the air inlet before each work day or after 2 hours of continuous use depending in the
characteristic of workpiece or type of fasteners.
Air-operated tools must be inspected periodically, and worn or broken parts must be replaced to keep the
tool operating safely and efficiently. Check and change all worn or damaged O-ring, Seals, etc. Tighten all the