Doremi AccessLink, Инструкция по установке и эксплуатации

Страница: 31 / 62

FAL.OM.002372.DRM Page 31 of 62 Version 1.6draft2
Doremi Labs
Figure 32: Audio Interface for DB25 Setups
3.3.1.2 RJ45 Connector Setups

If your setup consists of using RJ45 connectors, you will need to disconnect the RJ45
cables from your server or IMB.

Then connect these cables to the connectors on the Fidelio Audio Interface Box labeled,
“AES THRU CH 1-6,” and the other cable to the connector that reads, “AES THRU CH
9-
14” (Figure 33).

The other ends on these cables are to remain connected to your audio processor,
respectively.

Using the short RJ45 cable provided, connect one cable into the CH 1-8 AES OUT on
the server or IMB and the other end into the AES IN CH 1-8 connector on the Fidelio
Audio Interface box.

Using the other short RJ45 cable provided, connect one cable into the CH 9-16 AES
OUT on the server or IMB and the other end into the AES IN CH 9-16 connector on the
Fidelio Audio Interface box.
Figure 33: Audio Interface for RJ45 Setups