STEP 10:
UPHOLSTERED QUEEN BED
DA7288B/DA7288C
Connect slats (J) to the support rails (F, G, H, I) with bolts (6), spring washers (3), flat
washers (4) and nuts (11) as shown below. Use Allen key (1) and wrench (9) to install the
bolts (6) and nuts (11).
Tighten all bolts previously installed in steps 7 and 8.
(4)
(11)
(6)
6
9
4
11
(3)
3
4
1
Note: Make sure the middle
slat is attached to the aligning
holes on the side rails.
