Removing Seat Pad for Cleaning
Installing Harness System
12
1.
Release Elastic Straps on
Back and Bottom of the
Shell
2.
Remove Pad
Pull pad off the bottom of child
restraint and remove pad.
You must remove the harness system to remove the pad
from the shell. See pages 9-10.
WARNINGS:
Do not use child restraint without the seat
pad. Failure to do this can result in serious injury or death.
Cleaning Pad
Machine wash separately with cold water on a gentle cycle. Do not use
bleach. Tumble dry separately for 10-12 minutes on low heat. Remove
immediately.
Cleaning Harness Straps
Spot clean using warm sudsy water and damp cloth.
Replace Pad
Starting from bottom of child restraint, slip pad on shell. Pull harness
adjustment strap through pad. Wrap pad around the top of shell. Attach
all of the elastic straps. Install harness system, see pages 12-13.
1.
Insert Buckle’s Metal
Retainer into Slot
Buckle
MUST
face out.
3.
Check Buckle
Pull up on buckle to make sure it is
secured.
The buckle
MUST
not pull out.
4.
Rethread Harness Strap
With sewn end of harness strap
loop facing the buckle
, thread
harness strap down through hip
harness slot.
2.
Pull Metal Retainer
Completely Through
Pad and Shell
11
5.
Pull Harness Strap Across
Bottom of Shell
Harness strap
MUST
lay in front
harness adjustment strap as shown.
Push harness strap up through other
hip harness slot.
