Furniture Wall Safety Strap
1
2
3
4
5
TOOLS NECESSARY: RUBBER MALLET AND PHILLIPS SCREW DRIVER ARE NOT INCLUDED.
NOTE: 3/8" DRILL BIT AND ELECTRIC DRILL ARE NOT PROVIDED.
PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE
USING THIS PRODUCT AND KEEP THESE INSTRUCTIONS FOR
FUTURE REFERENCE. IF YOU HAVE ANY QUESTIONS, PLEASE
CALL OUR CUSTOMER SERVICE NUMBER: (800) 295-1980.
TO MOVE THE FURNITURE AFTER THE SAFETY WALL STRAP HAS BEEN INSTALLED, SIMPLY REMOVE THE
LONG SCREW (5) FROM THE WALL TO LOOSEN THE SAFETY WALL STRAP.
Check to make sure the straps (1) is securely laced and locked to the brackets (3).
Drill two 3/8" holes in the wall. Press the wall anchors (2) into the holes and gently tap until the flange
on the anchors is against the wall surface.
Position the brackets (3) over the anchors (2) and use the long screws (5) to securely, attach the
brackets (3) to the wall.
Place the furniture so the brackets (3) on the back edge is in line with the brackets (3) on the wall.
Lace an end of the safety wall straps (1) down through each bracket (3). Bring both ends together and
slide the beaded end of the straps (1) through the keyholes shaped slot in the other end until snug. Pull
down on the beaded end until it snap locks into the keyhole slot.
To double lock return the beaded end back through the keyholes as shown.
Step 8:
Step 3:
Step 4:
SAFETY WALL STRAP
2 PCS
WALL ANCHOR
2 PCS
MOUNTING BRACKET
4 PCS
SHORT SCREW
2 PCS
LONG SCREW
2 PCS
WARNING: WHEN UPRIGHT, IT IS POSSIBLE THAT THE FURNITURE
MAY TIP OVER. PLEASE INSTALL THE SAFETY WALL STRAP BEHIND
THE FURNITURE TO ENSURE SAFETY.
Step 7:
Step 1:
Step 2:
Attach two mounting brackets (3) securely to the back edge of the furniture. Use the short screws (4).
Determine where furniture is to be placed and mark location on the wall for the mounting brackets (3),
screw holes approximately 2" below the brackets mounted to the edge of the furniture.
Step 5:
Step 6:
