DORCHESTER DR-FC 25, Инструкции по установке, пусконаладке и обслуживанию

Страница: 30 / 98

Installation
30 Instruction Manual DR-FC
3
is
• 3.10.6 program-controlled pump ;
• 3.10.7 Extra ON mode switch (“Heater ON”) ;
• 3.10.8 Connecting extra error signal (“Alarm OUT”) .
n
Remark
The optional components are not included in the rating for electrical power
consumption (see tables in paragraph
3.4 ).
3.10.2 Preparation
c
Note
The water heater is phase-sensitive. It is absolutely essential to connect
the phase (L) from the mains to the phase of the water heater, and the
neutral (N) of the mains to the neutral of the water heater.
There should also be
no potential difference present between neutral (N)
and earth (
A
). If this is the case, then an isolating transformer must be
applied in the supply circuit. See ’3.10.4 Isolating Transformer’ .
Figure 3.6 shows a view of the electrical connection block. Table 3.9 shows the
associated connections.
Table 3.9 Electrical connection block
Unu
sed
Heater
on
Continuous
pump
Regulated
pump
Alarm Off Isolating transformer Mains power
primary secondary
X
1
X
2
A
L N N L
A
X
1
X
2
A
N L
A
N L
A A
L N
1-4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
Figure 3.6 Connection block (connections 1 through 24 explained in Table 3.9 )
1
24
IMD-0077
2
1
1
3