PL - DORA METAL SPÓŁKA Z O.O.
LED
ON
OFF
FLASHING
compressor on
compressor off
-compressor protection active
-setpointbeing set
defrost or pre-drip active
-
-defrost delay active
-dripping active
evaporator fan on
evaporator fan off
evaporator fan stop active
-energy saving active
-low consumption active
-
-
view temperature
-
-
device on
device off
-
cabinet light on
cabinet light off
cabinet light on by digital input
1.3. Keypad lock/unlock.
Lock - the controller locks the keypad automatically after 30 sec. (“Loc” on display)
Unlock - press and hold any button for 1 sec. (“UnL” on display)
1.4. Changing temperature setpoint.
Check whether the keypad is not locked (see 1.3)
To display and modify the desired cabinet temperature:
- press
,
diode starts flashing,
- use
or
arrows to change the setpoint value,
- Exit: Press
or take no action for 15 sec, and
diode will go out.
1.5. Energy saving.
When the device operates in “energy saving” mode,
green diode is lit.
1.6. Display of temperatures measured with each sensor.
- press and hold
for 4 sec: the first parameter will appear on the display,
- use
or
arrows to display a parameter for a given sensor
(
Pb1
– cabinet temperature;
Pb2
– evaporator block temperature) and press
to display the
temperature.
- exit: press
or take no action for 60 sec.
Upright refrigerators and freezers
45