Doosan DX225LC-3, Руководство по ремонту

Страница: 729 / 878

SP002337
Page 41
Electrical System
Max Flow (ATT) / Min Flow (ATT)
The max flow (ATT) /min flow (ATT) can be set up as
the max/min flow rate value of the attachment by the
user according to the attachment's specifications.
For instance, if the relevant attachment's use
capacity is 90 - 120 lpm, the user can set up 120 lpm
for the max. flow rate, and 90 lpm for the min. flow
rate.
The setup method is the same as the above max.
engine limit setup method. The change value by
stage in the jog switch operation is 10 lpm.
User Setting Max Flow
The user setting max flow is designed to set up the
flow rate segment of the attachment to be used by
the user.
Within the above setup max. flow rate (pump), max.
flow rate (ATT), and min. flow rate (ATT) scope, the
user can set up the max. flow rate value of the
attachment to be used.
The setup method is the same as the above max.
engine limit setup method. The change value by
stage in the jog switch operation is 10 lpm.
When setting up all above items, the setup limits are
outlined as follows. If these limits are exceeded, a
pop-up window is displayed for 3 seconds, saying
"You can set value in limit range!."
C. Camera Setting
The camera setting screen is designed to set up
various cameras' ON/OFF and normal/mirror.
From the vehicle configuration, select camera setting
to access the camera setting list screen.
Figure 38
FG018498
Breaker 1 Setting
Attachment Use
Max E/G Limit
Max Flow(Pump)
2 Pump Option
Button Type
Max E/G Limit
Max Flow(Pump)
2 Pump Option
User Setting Max Flow
You can set value in
limit range!
Max. Limit Min. Limit
Max E/G Limit 1,500 rpm 1,000 rpm
Max Flow (Pump) Conforms to the max. engine limit Conforms to the max. engine limit
Max Flow (ATT) 1,000 lpm Min. flow rate (ATT) + 10 lpm
Min Flow (ATT) 40 lpm
Of the max. flow rate (pump/ATT), the
smaller value - 10 lpm
FG018499
Vehicle Configuration
Attachment Select
Attachment Setting
Camera Setting
Jog Shuttle for Dial
s
DIG
ISO
USB
Figure 39