Doosan DL220, Руководство по эксплуатации и обслуживанию

Страница: 221 / 250

OP001015
4-77
Inspection, Maintenance and Adjustment
HYDRAULIC PRESSURE
CHECKS
Hydraulic pressure for most systems can be check by using the
remote test ports shown in (Figure 110).
Control Valve Pressure
1. Attach gauge to port (1, Figure 110).
2. Relief valve cartridge on control valve (Figure 111) must be
adjusted to open at 200 ± 5 kg/cm
2
(2,844 ± 70psi)
Brake Charge Pressure
1. Attach gauge to port (2, Figure 110).
2. Adjust relief valve cartridge on brake, pilot and fan motor
supply valve (Figure 112). Relief pressure (Figure 112) for
brake charging is 80 ± 5 kg/cm
2
(1,138 ± 70 psi).
1
3
2
4
5
FG015619
Figure 110
Reference
Number
Description Pressure
1 Main Pump Pressure (TPM)
210 ± 5 kg/cm
2
2
Brake Charge Pressure
(TP2)
80 kg/cm
2
3
Steer Pump Pressure (TPS)
at Only Steering Relief
200 ± 5 kg/cm
2
4
Transmission Clutch
Pressure (TM)
16 - 18 kg/cm
2
5
Control Lever Activation
Pressure (TP1) at E/G High
Idle
28 +2/-0 kg/cm
2
FG008107
Figure 111
FG008108
Figure 112