MENAPRO20032009
APRO 20
ENGLISH
The
APRO 20
microwave movement detector controls the opening of factory gates and
automatic doors. It works in the
K band
. It can be installed at a height ranging from 3 to 6
metres and guarantees the surveillance of an area from 3 to 30 square metres .
The device will be automatically activated by moving persons or vehicles within the
controlled perimeter.
APRO 20
has been developed using planar technology, and can be set in
mono-
directional
(to detect movement either in forward or backward direction) or
bi-
directional
(activated by movement in both directions). A microprocessor processes the
signals received – generated through a Doppler effect – and sends an OK to the opening
command.
A LED on the front panel indicates that movement has taken place inside the controlled
area.
TECHNICAL DATA
Power voltage
12 – 24 V
AC
/12 - 30 V
DC
Power current
max. 50 mA
Operative frequency
9.90 GHz
Output Power (EIRP)
d
14 dBm
Range
1 – 10 m adjustable
Relay control time
1 – 6 s adjustable
Degree of protection
IP 66
Installation height
max. 6 m
Detectable speed
0.1 m/s minimum
Relay contact
1A - 24 V
AC/DC
Vertical directionality
0-60°
Horizontal directionality
+/- 45°
Operating temperature
- 20 °C to + 50 °C
Dimensions/weight
160x95x110 mm / 500 g
Warranty
24 months
NOTE: A SELV power source must be used (certified power supply unit or safety transformer) in
compliance with CEI EN 41003:1993 standard.
We hereby declare that Apro20 complies with the essential requirements of Directive 99/05/EC (R&TTE)
harmonised radio standard pursuant to Art. 3.2 of Italian Law No. 269 dated 9.5.2001: EN300440-2 V 1.1.2
Via Cagliari, 19 - Tel. +390112482361
10153 Torino - ITALIA
