16
8.Trouble shooting
1. Check whether it is switched on.
2. Check whether the dust box, filter and intake are clean, and whether the side brush works.
3. Check whether the battery voltage declines greatly.
The Cleaner doesn’t work or clean poorly
1. Check the battery status of the remote control.
2. Check the battery status of the Robot cleaner.
3. Check whether the remote control is within the available scope of the signal transmitting.
The remote control doesn’t work
1. Check whether the adaptor is connected well with the charger and whether power LED of
the recharger is lighting
2. Check whether the battery power is too low; if so, charge the Cleaner with the adaptor
directly.
3. Make sure there is no barrier in front of the charging base .
4. Use the remote control to move the cleaner back to the charging base.
The Cleaner can not charge automatically
1. Clean the dust box and filter.
2. Check whether the brush or side brush is too dirty.
3. If the noise is still too loud, you may send back the cleaner to the after sale service
maintenance to add Lubricants..
Increased noise in cleaning
1. Check whether the set cleaning time is over.
2. Check whether there are failure codes on the display by reference of No.7 Failure Checking
The Cleaner stops working suddenly and rings intermittently
1. Avoid use in sunlight or dark color carpet .
2. Pat the front bumper..
The cleaner back off continuously
Clean the ground detection sensors at the front bottom of the cleaner
The cleaner dropped from the stair
Use the adaptor to full charged first.
The cleaner can not Auto-Charging after didn’t use in a long time
Don’t disassemble and maintain it by yourself, contact the after sale service maintenance
The cleaner stop to work , but no error code display