Dongyang Unitech DMC-20sec, Руководство пользователя

Страница: 34 / 52

2Mega HD-SDI Speed Dome Camera User manual
34
- ALARM CH On/Off : Alarm Input
– Each channel can be ON/OFF.
- According to signal connection, user can select ACTIVE OPEN(N/C) or ACTIVE CLOSE(N/O).
- If the user selects ACTIVE OPEN, it is activated when Alarm input is open, if the user selects ACTIVE
Close, it is activated when Alarm input is Close
5. ALARM PRESET SET
- The camera can move to a preset point automatically when the wrong signal is sensed in each ALRAM
CHANNEL.
- Set a preset point firstly to move, if wrong signal is sensed, then use that sets the preset number into
each ALARM CHANNEL.
- Select ALARM Channel
“OFF” and doesn’t move relevant preset point
- User can select PRESET Point number 1 to 250 and set it.
- It is checked exist Alarm status in the keyboard, if it is sensed wrong signal, the keyboard makes beep
sound and the security manager can check Alarm position status.
When many
cameras’ alarm are checked, it might
take time to transmit signal to Control keyboard when alarm is detected but the camera moves specific
preset position automatically.
Please refer to CONTROL KEYBOARD user manual
6. AUTO REFRESH TIME
- Initialize automatically for focus normal movement.
▶
OFF, 6hours~18hours, 1day~7days.
◈
Focus initialize pressing F/F key
7. NEXT MENU PAGE.
▶
Go to the next page.
8. RETURN TO MAIN PAGE.
▶
Go to previous page.
- SPECIAL SET.
1. OSD DISPLAY : ID+STATUS
2. SELECT ALARM
: SENSOR
3. MOTION DETECTION
: OFF
4. ALARM CHANNEL ON/OFF.
5. ALARM PRESET SET
6. AUTO REFRESH TIME : 3 Day
7. NEXT MENU PAGE.
8. RETURN TO MAIN PAGE.
JOYSTICK U/D/L/R TO SELECT.
- ALARM PRESET SET.
CH 01: 001 CH 02: 002
CH 03: 003 CH 04: 004
PREVIOUS MENU PAGE.