Dongyang Unitech D-max DWC-540F, Руководство пользователя

Страница: 24 / 31

24
1. MIRROR
Select “OFF” to show the image as normal. Select “ON” to reflect image horizontally.
2. FREEZE
When frame repeat count is set to 0, the same image continues to repeat until the property
value is changed. This has the effect of a “freeze frame.”
Note: If frame repeat count is set to 0 (Freeze), the user should NOT be allowed to do a
save user settings, as this will cause an inconsistent state with no loaded image at
boot/reset
.
3. SHARPNESS
Adjust the SHARPNESS level of full screen by setting the “GAIN” level from -8 ~8.
Select “ HORIZONTAL” for adjusting H. SHARPNESS only.
The larger the SHARPNESS parameter, the sharper the images.
SPECIAL PAGE 2
MIRROR OFF
ON
FREEZE OFF
▶
SHARPNESS - 8 -- ▪ -- 8
FLICKERNESS OFF
FLUORESCENT LIGHT ON
FACTORY RESET
SYSTEM INFORMATION FW Rev
SAVE & RETURN
SPECIAL PAGE 2
MIRROR OFF
ON
▶ FREEZE OFF
15 Frm
SET
SHARPNESS - 8 -- ▪ -- 8
FLICKERNESS OFF
FLUORESCENT LIGHT ON
FACTORY RESET
SPECIAL PAGE 2
▶
MIRROR OFF
ON
FREEZE OFF
SHARPNESS - 8 -- ▪ -- 8
FLICKERNESS OFF
FLUORESCENT LIGHT ON
FACTORY RESET
SYSTEM INFORMATION FW Rev
SAVE & RETURN
8. SPECIAL PAGE 2 MENU