Bluetooth Pairing
1. Power the headphones ON. A tone will be heard, and
theheadphone LED indicator will flash RED and BLUE.
2. Set your mobile device to search for Bluetooth devices.
When it appears, select HS-BT183 from the list of found devices.
3. After a successful pairing, a tone will be heard and the head-
phone LED indicator will slowly flash BLUE.
In Bluetooth mode, playback and volume can be adjusted withthe
on-ear controls, or the controls on your paired device..
. Press the [ b ] button to pause and resume playback.,
. Press the [+ ] and [- ] buttons to skip tracks.
. Press and hold the [+ ] and [- ] buttons to adjust volume.
Connecting with a 3.5 mm Aux Cable
Plug one connector of a 3.5 mm auxiliary cable (not included)into the
3.5 mm aux input port on the bottom of the left earcup.Plug the other
connector into the audio output port on urmedia-playing device.
. ln auxiliary mode, playback and volume will be adjusted withthe
controls on your connected device.
. The headphones will automatically power OFF when a 3.5 mmaux
cable is unplugged.
FCC
Warning
Statement
Changes
or
modifications
not
expressly
approved
by
the
party
responsible
for
compliance
could
void
the
user’s
authority
to
operate
the
equipment.
This
equipment
has
been
tested
and
found
to
comply
with
the
limits
for
a
Class
B
digital
device,
pursuant
to
Part
15
of
the
FCC
Rules.
These
limits
are
designed
to
provide
reasonable
protection
against
harmful
interference
in
a
residential
installation.
This
equipment
generates
uses
and
can
radiate
radio
frequency
energy
and,
if
not
installed
and
used
in
accordance
with
the
instructions,
may
cause
harmful
interference
to
radio
communications.
However,
there
is
no
guarantee
that
interference
will
not
occur
in
a
particular
installation.
If
this
equipment
does
cause
harmful
interference
to
radio
or
television
reception,
which
can
be
determined
by
turning
the
equipment
off
and
on,
the
user
is
encouraged
to
try
to
correct
the
interference
by
one
or
more
of
the
following
measures:
‐‐
Reorient
or
relocate
the
receiving
antenna.
‐‐
Increase
the
separation
between
the
equipment
and
receiver.
‐‐
Connect
the
equipment
into
an
outlet
on
a
circuit
different
from
that
to
which
the
receiver
is
connected.
‐‐
Consult
the
dealer
or
an
experienced
radio/TV
technician
for
help.
This
device
complies
with
part
15
of
the
FCC
Rules.
Operation
is
subject
to
the
following
two
conditions:
(1)
This
device
may
not
cause
harmful
interference,
and
(2)
this
device
must
accept
any
interference
received,
including
interference
that
may
cause
undesired
operation.
