20
How to disassemble fan cover of damp - Air ventilator
(bottom of the rear panel )
Please press a head of on pressing "A"
•While the damp air inside the product goes out through the damp
air ventilator the moisture and dust materials may be mixed and it
makes them contaminate.
•So disassemble and clean the fan cover and the ventilating fan.
“A" PART
Be sure to turn off machine remove the cover.
it might cause injury.
19
How to disassemble the mixing bowl
How to disassemble the water tank
1
Hold the canister with both fingers and remove
it by lowering and pulling it upward part "A"
2
After remove "A" part,
Turn off upward part "B".
3
Remove the mixing part in the
direction to an arrow
4
Remove Drink outlet hose &
Mixing bow
How to disassemble parts
1
Pull the draining hose of
the rear side and
remove the lid.
•The water in the tank is
drained completely.
•Turn the power off after
draining water.
•Be careful hot water.
Precaution While draining water, be careful of
hot water because hot water (above 90℃)
gets drained from the beginning.
2
Disconnect the rear side
cover with + type screw
driver.
3
Loosen screws on
the rear panel and
push the water
tank and then,
disconnector and
pull it out.