manualshive.com logo in svg

DOMUSA TEKNIK AVANTTIA HDX, Инструкция по эксплуатации и руководство пользователя

Поделиться
Скачать
DOMUSA TEKNIK AVANTTIA HDX Скачать руководство пользователя страница 15

 

 

13

7

 

LAGO FB OT+ REMOTE CONTROL (OPTIONAL) 

A remote control (LAGO FB OT+) can optionally be supplied together with the 

Avanttia

 boiler. This 

remote control can be used to fully operate the boiler from anywhere in the room in which it is 

installed. The LAGO FB OT+ remote control governs the parameters of heating circuit Nº 1 and the 

installation’s domestic hot water production. 

This remote control allows the hours of home comfort to be programmed for heating circuit Nº 1, 

adjusting the installation to the particular requirements of the home by measuring the room 

temperature and consequently adapting the installation temperature. The remote control can also be 

used to adjust the hot water and heating set point temperatures at any time, and for viewing the 

different boiler operation parameters. It also warns of any functioning anomalies affecting the boiler. 

The LAGO FB OT+ remote control may optionally be connected to an external sensor, for measuring 

the outside temperature. With this option installed, the remote control can adjust the home comfort 

level (circuit Nº 1) according to the weather conditions at each particular time, optimising fuel 

consumption and heating comfort in the home. 

The LAGO FB OT+ remote control takes over the control of the boiler when it is connected to it. The 

different selectable boiler temperatures must be modified using the remote control. It is easy to install, 

only requiring 2 wires for communication between the boiler and the LAGO FB OT+ control. It is 
connected to the boiler by connecting the two wires on terminal strip 

J6

 (see “Electrical Connection 

Diagram”). For correct installation and functioning, carefully read the instructions enclosed with the 

remote control. 

The following sections contain a general explanation of the different operating modes and options of 

the LAGO FB OT+ remote control. 

NOTE:  The "AF outdoor temperature sensor" indicated in the instructions manual of remote 

controller is not compatible with the boiler, so it is compulsory the use of "EVT outdoor 
sensor" (provided within the boiler) to measure the outdoor temperature. 

7.1

 

Functioning without an outdoor sensor 

Conventional heating installation (direct circuit) 

The maximum temperature for heating circuit Nº 1, the heating times and the desired room 

temperatures can be selected on the remote control. The LAGO FB OT+ remote control will 

calculate the boiler temperature required at each particular time, depending on the temperature 

of the room, and it will activate or disable the heating mode of circuit Nº 1 depending on the 

heating times and room temperatures programmed. 

Instalation of heating circuit Nº 2 (optional) 

If the boiler is supplied with an second heating circuit, this circuit is adjusted and controlled via 

the boiler control panel (see 

"Functioning of heating circuit Nº 2 (optional)"

).  

Содержание AVANTTIA HDX

































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды