Domo Sapphire RXD3, Руководство по установке, Страница: 11 / 43

Revision: 1.0 Sapphire-RXD3 Setup Guide
Copyright © 2022 Domo Tactical Communications (DTC) Limited. All rights reserved.
Commercial in Confidence
Page 3-6
No. Item Notes
12 BNC socket (75 Ω )
Note : This is not valid for
the RXD3 variant and will
be plugged.
The packet diversity input (PKT IN) allows you to double the
diversity of the system by linking a remote receiver via ASI.
Each unit will provide coverage in a different area but will act
like a single receiver.
13 XLR 3-way jack (pins) Audio stereo line level audio output left. See
Section 3.4.3
for
pinout.
14 XLR 3-way jack (pins) Audio stereo line level audio output right. See
Section 3.4.3
for
pinout.
15 Hirose 4-way jack (pins) RS-232 data port. See Section 3.4.2 for pinout.
3.4 Pinout
3.4.1 Power
Mating part: Neutrik NC4FX
Pin Function
1 0V
2 N/C
3 N/C
4 VIN (12VDC nominal)
3.4.2 Data
Mating part: Hirose HR10-7P-4S(73)
Pin Function
1 GND
2 RX
3 TX
4 N/C
3.4.3 Audio
Mating part: Neutrik NC3FX
Pin Function
1 0V
2 AUD OUT+ (L/R)
3 AUD OUT- (L/R)