Domo DO9094W, Инструкция пользователя

Страница: 22 / 28

DO9094W
• Switch the scales on.
• Make your choice between weighing by weight or volume.
• After the first ingredient has been weighed on the scales press briefly on the
“0” button.
• The display will display “0” again and the word “Tare” will be visible on the
left of the display.
• Choose once again between weight and volume.
• Now you can weigh the next ingredient.
• The display will only show the weight of the ingredient weighed last.
• You can apply this several times until you have added and weighed all of the
ingredients.
The Tare function can be cancelled by pressing briefly on the
“0” button before weighing the next ingredient. The weight of
the ingredient that was weighed first will be displayed again.
The maximum amount that can be weighed on the scales is
5kg. Attempting to weigh heavier amounts can damage your
scales.
MAINTENANCE
Never submerge the bowl holder in any type of liquid and do
not clean it in a dishwashing machine.
The removable bowl is the only part you can wash in the dish-
washer.
Press the knob at the front upwards to remove the bowl from
the bowl holder.
Clean the white bowl in warm water and do not use aggressive
detergent. Do not use any types of abrasive cleaning agents.
Dry the bowl carefully before putting it back into place.
Clean the bowl holder with a damp cloth.
ERROR MESSAGES
UnSt Unstable
The scale is unstable and will switch itself off. Place the scale on a
flat surface and press once on the “0” button.
Err Error
The scale is overloaded. You will hear an acoustic signal. Remove
the excess weigh immediately.
CALIBRATION
In order to achieve an accurate measurement you must adjust the appliance to “0”
before weighing. If the appliance is not set to “0” you have to calibrate it.
22