DO426BL
www.domo-elektro.be
18
Knife assembly
Removal of the knifes
REMOVE THE KNIFES ONLY WHEN ABSOLUTELY NECESSARY!
Remove the knifes from the jug by turning the bottom part of the jug (threaded ring)
in a counter clockwise direction.
Place the whole on a flat surface to facilitate the removal. Place a thick cloth over the
knifes and pull them out straight.
The knifes are very sharp. Be extremely careful when you touch them.
To replace the knifes
When you place the threaded ring and the knifes on the jug, ensure that the level sides
of the knifes are placed equally with the level sides of the opening of the jug. Turn the
white threaded ring clockwise onto the jug until secure.
IMPORTANT: if the knifes are not installed correctly, the appliance will produce more
noise.
Cleaning
Jug
Empty out the jug and fill it with water. Place the jug on the motor case and turn the
dial several times to the ‘Pulse’ position (hold the dial). Empty out the jug and repeat
this process until the jug is clean.
Knifes
Clean the surface of the knifes with clean soapy water. Do not let the knifes soak
or use scrubbing materials. If necessary, you may use a soft brush to remove any
remaining material.
Rinse the knifes under streaming water and dry them with a clean cloth.
Do not wash the underside of the knife component with water or any other liquid.
Do not place the knifes in the dishwasher.
IMPORTANT
If you clean the jug, without removing the knifes, dry them thoroughly or place the
jug on its side to dry. Always clean the appliance before using it and always follow
instructions as described in this manual.