32
DO217SV
EN
We advise replacing the filters regularly to ensure an optimal operation of the machine. Dirty
filters will reduce the suction power drastically. After every cleaning, clean the dust reservoir
and the filters to extend the life span of your machine.
CLEANING THE FLOOR BRUSH
1. Remove the floor nozzle from the upright vacuum cleaner. Press the relea
se button at
the back of the floor nozzle and remove it from the machine.
2. Click on the release button on the left of the floor brush.
3. Remove the
rotating floor brush from the floor nozzle.
4. Remove hairs and other dirt that have wrapped around the floor brush. If you do not
clean the floor brush regularly, it will become damaged and your machine will become
unusable.
5. The rotating floor brush may be rinsed off under running water. Make sure that it is
completely
dry before using it.
6. Place the floor brush back into the floor nozzle when it is clean.
7. Click the closure valve back into place to close it.
8. Push the nozzle back onto the stick. The machine is now again ready for use.
Stuck hairs can dama
ge the machine or your floor. Always remove the hairs stuck on the
brushes.
CLEANING THE MACHINE
Clean the machine with a slightly moist soft cloth. Dry the machine off well. Never submerge
the machine in water!