Domo DO209S, Инструкция пользователя, Страница: 33 / 48

DO209S
33
CHARGING
Place the hand vac into the charging station by making sure that the charging pin
slides into the charging pin input of the hand vac. always make sure that the hand vac
is switched off when placing it into the charging station. When the hand vac makes
contact with the charging station, and therefore is placed correctly into the station,
the indication light will light up. the light will go out again when the battery is fully
charged.
It takes 14 to 18 hours to fully charge the batteries for the first use.
When the batteries are entirely empty, it takes about 14 hours to fully recharge the
batteries.
to make sure that the hand vac is always ready to be used, you can leave the appliance
into the charging station when it is not being used.
the adapter may become warm during charging. this is normal.
WALL MOUNT
1. Make sure that the spot where you want to wall mount your hand vac is free from
electrical wires and water or gas pipes.
2. Place the charging station near a power outlet.
caution: do not mount the charging station in direct sunlight, near a heat source or
outside.
3. accurately draw the mounting openings and drill the holes.
4. Mount the charging station to the wall.
VACUUMING
Lift the hand vac out of the charging station in a vertical way.
1. Vacuuming dry dirt
start and stop the hand vac by pressing the on/off button. Mount the crevice
nozzle on top of the hand vac to vacuum in places that are hard to reach.
2. Vacuuming liquid dirt
Remove all dust from the dust container. Place the liquids nozzle on to the hand
vac. When you use the hand vac to vacuum liquids, always hold the hand vac with