Domitech ZSC, Руководство пользователя, Страница: 8 / 10

You can set the smart bulbs into Group 2 or Group 3. Maximum of 5 Smart Bulbs can be
added in each group.
5. CONTROL MODE
You can set the ZSC to control other devices or they issue various scene activation
commands to a central controller.
Parameter No: 2
Length: 1 Byte
Valid Values = 0, 1, 2 (Default 0)
Value = 0: ZSC can activate the Scene which is pre ‐ set by Gateway, and then control the
associated Smart Bulbs in either Group 2 or Group 3.
Value = 1: ZSC can only activate the Scene which is pre ‐ set by Gateway.
Value = 2: ZSC can only control Smart Bulbs in Association Group 2 and Group 3.
6. REVERSE BUTTON
If the ZSC is installed upside down, you can set the below
Parameter No: 4
Length: 1 Byte
Valid Value = 0 or 1 (Default 0)
7. EXCLUSION
Step 1, place your network controller into Exclude mode by following the controller
manufacturer’s instructions.
Step 2, press any button on the ZSC.
Step 3, the LED will flash twice and ZSC exclusion is successful.
8. FACTORY RESET
Press the Top button 3 times and then Bottom button 3 times very quickly within 2 seconds.
LED will flash 7 times if RESET is successful. Repeat procedure until the LED flashes 7 times.
IMPORTANT NOTE:
Please note that it is extremely important to follow the above procedure to have ZSC operate
properly with your home gateway. Installation of ZSC ensures that the power to the smart
light bulb always remains ON. Without the electrical power to the Smart Bulb, the Smart
Bulb cannot be turned ON remotely nor function as a signal repeater to maintain proper Z ‐
Wave network.
About the Z ‐ Wave 500 Series Module with Z ‐ Wave Plus features:
You can use a Z ‐ Wave certified portable or static controller to communicate with your Z ‐
Wave devices. Depending on the capability of your controller or gateway software, the
following simple to advanced operations may be performed. Please refer to the controller or
gateway manual for details.
1. Add(Include) or Delete(Exclude) the Smart Bulb to/from your network
2. Turn On or Off the Smart Bulb remotely
3. Dim up/down individual Association Group or turn on the Scene which is pre ‐ set by