Domino A-SERIES Скачать руководство пользователя страница 43

Страница: 43 / 337

OPERATION

27080 Issue 1 August 98

3--9

message names may extend off the screen -- continuing to use the
cursor key will automatically scroll the list.

Note:

A message being currently used for printing (marked ”>”) cannot
be deleted.

(3) Select

Delete Message

from the key options. The screen will change

to show

Delete message?

and the message name.

(4) Select

to delete the message and the screen will return to the list

of messages.

The deleted message name will not now be included in the list and
steps (2) to (4) can be repeated to delete any other messages.
(5) Select

Cancel

from the key options.

To Select an Existing Message

(1) With Message Store selected, press the scroll keys to search the key

options and select

Select Message

. The screen will change to show

a list of names of stored messages.

(2) Use down-- and up--cursor keys to move the highlight bar to select

the name of the required message.

(3) Select

from the key options. The display will change to show

the name of the chosen message only.

Note:

To print this message, select Print Message from the key options.

(4) Press Message Editor and the display will show the full message.

To Enter a Clock Entry

(1) With Message Editor selected, select

Insert Clock

from the key

options. The display will change to show the Insert Clock screen
with a highlight bar over

Clock Offset Number

(2) Type in a numerical value, e.g. 2. (This value selects one of four

clocks on A300/A200, or one of two clocks on A100, containing
time offsets entered into the printer by way of the

Clock Offsets

option. For example, a continuously updated date four weeks
ahead of the current date can be inserted into the message).

(3) Press the down--cursor key to move the highlight bar down over

Format

The clock entries consist of names, etc. arranged in a range of formats.
The names, codes, available formats, etc. can all be changed if required
(see pgs. 5--33 a nd 5--34).

Delete

Message

Cancel

Select

Message

Insert

Clock

Содержание A-SERIES


















































































































































































































































































































































Результаты поиска

Содержание A-SERIES

Отзывы:

Похожие инструкции для A-SERIES

Бренды по названию

Популярные бренды

Domino A-SERIES, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание A-SERIES

Отзывы:

Похожие инструкции для A-SERIES

Бренды по названию

Популярные бренды