Dometic WH-6GEA, Руководство пользователя

Страница: 13 / 52

13
EN
L.P. Gas Water Heater Installation
• Do not high-potential test (HI-POT) the water heater
unless the DSI control board has been disconnected
(DC HI-POT).
• Do not use a battery charger to supply power to the
water heater at any time or when testing.
NOTICE:
Do
not
modify the water heater in any way.
NOTICE: Do not lift, push, or misalign the main burner
tube. Damage to the burner and the water heater can
occur.
I Install in recreation vehicles only. RVs are recreation
vehicles designed for temporary living quarters
for recreation, camping, or travel using their own
power or towed by another vehicle.
w
q
13 Caulking the Unit
q
Opening
w
Flange Slots
1. Caulk throughly around the opening and the flange
slots.
I Butyl tape 1-1/4 in. x 1/8 in. (32 mm x 3 mm) may
be substituted for caulking material.
2. Push the unit against the caulking in the cutout.
e
q
w
t
r
14 Securing the Brackets to the Water Heater Flange
q
Top Corner Brackets
r
Bottom Left Corner
Bracket
w
Left Hinge Bracket
e
#8 3/4 in. Round Head
Screws (qty. 18)
t
Bottom Right Corner
Bracket
3. Secure the two top corner brackets to the water
heater flange using six #8 3/4 in. round head screws
or equivalent.
I
The screws are not provided with the unit.
4. Place the left hinge bracket over the bottom left
corner bracket and secure them to the housing using
three #8 3/4 in. round head screws or equivalent.
5. For the bottom right corner bracket, attach using only
one #8 3/4 in. round head screw or equivalent in the
top hole for now.
6. Secure the housing to the RV using eight #8 3/4 in.
round head screws or equivalent in the holes around
the flange.
7. Visually inspect all gaskets to ensure that they adhere
to the pan and create an air tight seal.
8. Cut the strap on the front of the water heater and
gently pull free from the brackets.
I Do not remove the brackets.