Dometic TEC60, Руководство по установке

Страница: 32 / 220

EN
Installation TEC60
32
For internal installation, you need to prepare a sealed compartment against
the vehicle interior which can also be insulated against sound.
– Attach exhaust openings to the floor.
➤
Mount the gaskets to the casing and affix them with the srews (fig. 3 ,
page 3).
➤
Position the casing in the desired area and attach it with the appropriate
screws.
(fig. 4 , page 3).
➤
Insert the generator into the casing and screw it into place (fig. 5 ,
page 3).
➤
Mount the casing flap and attach it with the pins (fig. 6 , page 3).
9.3 Securing the silencer
Observe the following instructions when installing the exhaust pipe:
 Do not create any sharp bends which will inhibit the flow of exhaust
fumes.

Align the manifold (fig.
7
1, page 4) along the housing to ensure greater
damping of vibration.
 Use the exhaust pipe extension to divert the exhaust fumes (fig. 7 2,
page 4).
Secure the extension to the vehicle floor (fig.
7 3, page 4).
➤
Secure the silencer (fig. 7 4, page 4) as in one of the alternatives shown
in fig. 8 , page 4 to fig. b , page 5.