Dometic SKYSCREEN, Инструкция по сборке и установке

Страница: 3 / 8

Page 3 of 8
Tensioning the Blind or Fly
With the screen facing you, the tension adjustment is located under the right hand top screw cover
Remove screw cover and
turn the SKYSCREEN over.
SPRING TENSION
Un-clip the tensioner as shown.
CAUTION, this will be under spring tension.
SPRING TENSION
Insert screwdriver in tensioner slot and allow spring to retract
from corner moulding. Spring tension will now be felt in the
two directions shown.
Keeping spring under
tension, clip the tensioner
back in to the corner
moulding.
Turn clockwise to tension or
anti-clockwise to de-tension.
NOTE: No more than 8 full
turns should be required.
To test for sufficient tension, pull blind/fly back to the distance
shown and let go. The blind should fully return smoothly
without snapping back into casette.
The SKYSCREEN Is assembled and tested before shipping and does not need tensioning. However if tensioning is lost for any
reason, please follow the steps below.