Dometic RMD10, Руководство по установке, Страница: 20 / 44

EN
Installing the refrigerator RMD10
20
➤
Seal the installation frame to make the connection waterproof (fig.
0
, page 8).
➤
Insert the installation frame and screw it down tightly (fig.
a
, page 8). Use all the
fixing holes for this.
➤
Insert the ventilation grill as shown (fig.
b
, page 8).
4.5 Installing condensation drain
I
Install the condensation drain as follows:
Variant 1
➤
Run the condensation hose from the refrigerator through an opening in the floor
which goes outside under the vehicle.
Variant 2
➤
Attach the condensation hose directly to the fitting intended for it on the
ventilation grill (fig.
9
4, page 7).
4.6 Install the roof vent
➤
Seal the installation frame to make the connection waterproof (fig.
d
, page 8).
3 Installation frame
4 Fastening for condensation drain
NOTE
• Condensation can form inside the refrigerator due to frequent door
opening, incorrectly stored food or food that is stored when it is too
warm.
• Condensation must be drained with a constant slope.
No. in
fig.
c
, page 8
Description
1 Hood
2 Installation frame
No. in
fig.
9
, page 7
Description
RMD10_INM_US.book Seite 20 Dienstag, 10. Dezember 2019 2:09 14