Dometic RCCA 920, Руководство по эксплуатации

Страница: 8 / 11

Switching on
• Switch on the unit by pressing the - button on the electronic unit.
• Shortly after switching on, the inside temperature of the unit is shown on the
display.
Temperature Setpoint
• The temperature set point is the set target temperature of the appliance.
• The set temperature set point can be displayed by briefly pressing the “SET” button
on the electronic unit. After 5 seconds the display switches back to the normal
temperature display.
• The factory set temperature is +3°C.
• Any change of the setpoint temperature or any other parameter would have an
important influence on the proper functioning of the appliance and therfore can
only be done by a service technician.
Door Switch
• The integrated door switch detects any opening of the door.
• During door opening the internal fan will be switched off, to avoid warm outside air
being sucked into the refrigerator.
• An excessive door opening time will trigger a door alarm.
Alarms
• When an alarm situation occurs, attempts must be made to find the cause of the
alarm and rectify it as soon as possible. If unable to do so, the necessary measures
must be taken immediately so that the goods stored are not damaged.
Temperature Alarm
• If the inside temperature of the appliance goes above or below the set alarm
values, both an acoustic and an optical alarm is triggered by the electronics.
• The optical alarm consists of :
1.) the alarm symbol being shown on the display and
2.) the inside temperature of the appliance and the alarm message “HA” in case of
warm alarm or “LA” in case of cold alarm displayed alternately.
• The display switches back to the normal temperature display once the alarm
situation is over.
• The acoustic alarm can be muted for 30 minutes by pressing any button on the
electronics. If the alarm situation has not been rectified by the end of this period,
the acoustic alarm is activated again.
AUX
AUX
8