How to Operation
Cooling Mode
Under cooling mode, cooling indicator will light on.
Temperature Setting is from 16
℃
to 30
℃
.
Press Fan Speed Button to choose from low/ high fan speed.
Fan Mode
Under Fan mode, indicator will be on.
Press Fan Speed Button to choose from low/ high fan speed.
Temperature cannot be set under this mode.
Dry Mode
Dry indicator will be on under this mode.
Remove water plug (see right), insert one end of pipe to
drainage
hose
，
the
other end would be in water tank or
water channel.
If ambient Temp.
≥17
℃（
or 62
℉）
compressor starts and
follow below sequence: if ambient Temp.
≤15
℃
(or
9°F)
compressor
stops
；
when it reaches
≥17
℃，
compressor
starts again.
（
There would be a 3-min delay for
Compressor protection
）
Fan runs with a fixed low speed.
Temperature
is fixed.
(Notes
：
Under dry mode
，
please dismantle air exhaust
duct, or performance
will be affected and water full alarm“FL” will buzz.
Heating Mode (not available for cooling only model)
Under this mode, heating indicator will light up.
Press UP/DOWN button to select Temp
erature
between 16
℃
and
30
℃
.
Press Fan Speed button to set low/ high speed.
15
EN
