EN
Mini Heki Plus
Instructions before installation
13
6
Instructions before installation
➤
Before installation, check the roof thickness of your vehicle. Consult the
vehicle manufacturer if you have any questions.
➤
When choosing the installation location, observe the following:
– Adjoining components (roof rack or attachment and reinforcing parts),
cables and cabinets in the vehicle interior must not be damaged when
sawing the hole.
– Only fit the roof light on flat and parallel interior and exterior roof areas
with a maximum inclination of 15° to the horizontal.
– You may use an existing roof hole provided the roof light fits into it.
6.1
Pressing out the hole
See fig.
2
6.2
Using the reinforcing rails
Supplementary to fig.
3
➤
Before installation, check whether the roof hole needs reinforcing.
➤
Remove the foam according to the width of your reinforcing rail (not in
scope of delivery) (
A
).
➤
Fit the reinforcing rails (
B
).
7
Installing Mini Heki Plus
Supplementary to fig.
4
The scope of delivery contains a mounting frame, which is suitable for roof
thicknesses of 25–42 mm or 43–60 mm.
➤
Measure your roof thickness W.
➤
Shorten the sleeves to size H (see table).
➤
Use the screws with appropriate lengths (see table).
Siehe fig.
5
➤
Check that the roof light has sufficient space around (approx. 1 to 2 mm)
it in the roof opening.
