Dometic Go Power! C Series, Руководство пользователя

Страница: 23 / 34

gpelectric.com | [page 23]
SHORE POWER
UNIT READINGS
INVERTER
ON/OFF
CHARGER
ON/OFF
ENTER / SET BACK
UNIT SETUP
REMOTE SETTINGS
®
SHORE POWER
UNIT READINGS
INVERTER
ON/OFF
CHARGER
ON/OFF
ENTER / SET BACK
UNIT SETUP
REMOTE SETTINGS
®
UNIT SETUP
04 Max . Cha Time
UNIT SETUP
05 Battery Type
This option sets the maximum time the charger is allowed to charge the
batteries.
The default time is 12.0 Hrs and the range is 0 to 25.5 hours (increments
by 0.1 Hours).
5. BATTERY TYPE
The battery type option is used to change the charging profiles for each
of the following battery types: Gel, Flooded, AGM1, AGM2 and Custom.
The fixed voltage settings are shown in the table below for the different
types of batteries.
The custom battery type setting allows the user to individually adjust the
float and absorb charge voltage settings for your batteries. The following
voltage settings can be modified and set when the custom battery type
option is selected;
Absorb - Sets the level at which the charging voltage is held constant during
an absorption cycle. The default value is 14.0V and the range is 12.0 to
16.0V (increments by 0.1 VDC).
Float - Sets the level at which the charging voltage is held constant during a float cycle. The default value is 14.0V and the range is
12.0 to 16.0 VDC (increments by 0.1 VDC).
Equalize - Sets the level at which the charging voltage is held constant during an equalization cycle. The default value is 14.0V and
the range is 12.0 to 16.0 VDC (increments by 0.1 VDC).
Type Inverter
Voltage
Absorption
Voltage
Float
Voltage
Equalization
Voltage*
Gel 12 VDC 14.1 VDC 13.6 VDC No Equalize
Flooded 12 VDC 14.6 VDC 13.4 VDC 15.5 VDC*
AGM 1 12 VDC 14.3 VDC 13.1 VDC 15.5 VDC*
AGM 2 12 VDC 14.5 VDC 13.5 VDC No Equalize
Custom 12 VDC 14.4 VDC 14.1 VDC 12.7-14.1 VDC**
*only applicable if equalizatioin option is enabled
**set within this range to neutralize the Equalize function as lithium batteries DO NOT require any form of equalization.
6. CHARGE RATE
The charge rate is used to set the maximum charge rate allowed to charge the batteries during bulk, absorption, float and equalize
OPERATION