12
INSTALLATION
PINCH HAZARD. Do
NOT
operate [slide
out room / Slide Topper] with objects or people in its path.
Failure to obey this caution could result in injury.
Do
NOT
close [slide out room / Slide Top-
per] with leaves, sticks, or other debris on awning fabric.
The Slide Topper will automatically open and close as your
slide out room opens and closes. Follow all instructions
provided with the RV slide out room.
If slide out room is left open during rainy conditions,
some water may collect on Slide Topper. This will
cause water to spill over the sides as Slide Topper
rolls up (slide out room closes).
OPERATION
FIG. 21
Cover
Center
Support
Bracket
Spacer
#10-12 X 1
″
PHCR SS Screws
ALWAYS
position center support di-
rectly in middle of roller tube. Otherwise, damage to
awning could occur.
Slide Toppers 294″ and wider
REQUIRE
3
Center Support Brackets. In this application
Center Support Brackets
MUST
be posi-
tioned at 1/4, 1/2, and 3/4 of the Slide Topper
length.
ALWAYS
install edge protectors on
slide out room flange. Otherwise, damage to aw
-
ning fabric could occur.
Starting at 1/4″ to 1/2″ beyond edge of slide out
room flange, press edge protector onto top edge
(of slide out room flange) until it is fully engaged
and secured in place. Repeat for other end. See
(FIG. 22).
See "B. Optional Components & Kits" on
page (4) to order Dometic edge protec-
tors.
A Dometic edge protector may
NOT
be com-
patible with all applications. If a Dometic
edge protector cannot be used, a similar
type (compatible) edge protector
MUST
be
installed.
FIG. 22
Slide Out
Room Flange
Edge Protector
1/4″ - 1/2″
(Typical)
