EN
CRX
Using the refrigerator
19
8.1
Energy saving tips
•
Choose a well ventilated location which is protected from direct sunlight.
•
Allow hot food to cool down first before you put it in the refrigerator.
•
Do not open the refrigerator more often than necessary.
•
Do not leave the refrigerator drawer open for longer than necessary. If the drawer
is left open for more than 5 minutes, the light starts to flash.
•
Defrost your refrigerator as soon as a layer of ice forms.
•
Avoid unnecessarily low temperature settings.
•
Clean dust and dirt from the condenser at regular intervals.
8.2
Switching on the refrigerator
I
➤
Switch the refrigerator on by pressing the button.
I
8
8.3
Setting the temperature
➤
Press the button repeatedly until the desired temperature level is set.
The more LEDs light up above the button the lower is the temperature level.
To switch from the last level to the first level press the button again.
I
NOTE
Start the refrigerator only if you are using a battery monitor or if the
alternator in your vehicle provides sufficient voltage.
NOTE
After switching on, the refrigerator needs some time before the
compressor starts up.
NOTE
The cooling performance can be affected by:
•
The ambient temperature
•
The amount of food to be conserved
•
The frequency with which the drawer is opened.
If the ambient temperature is at 16 °C (61 °F) to 20 °C (68 °F), set the
refrigerator to at least level 2.
CRX65D-IO-EN.book Seite 19 Freitag, 21. Dezember 2018 9:10 09
