![Dometic CLASSIC RM 2620 Скачать руководство пользователя страница 27](http://html1.mh-extra.com/html/dometic/classic-rm-2620/classic-rm-2620_installation-instructions-manual_2518876027.webp)
- 27 -
NDM1062
To install the door handles, follow these steps:
1. Locate the plastic bag containing the handles and
screws.
2. Open freezer door.
3. Position handle. Align the holes in the
handle with the holes in the frame.
4. While holding handle firmly against the door, fasten
screws with a Phillips screwdriver. Close the door.
INSTALLATION PROCEDURE
Door insert panels Stainless steel doors
Door insert panels Stainless steel doors
5. Open fridge door and repeat steps 3 and 4 to install
the second handle.
REFRIGERATOR REMOVAL
INSTALLING THE DOOR HANDLES
RM3762 & RM3962 - Stainless steel doors
To install the door handles, follow these steps:
1. Snap on the handle by inserting its two tabs in the
slot and slide into place.
2. Attach the handle with two screws.
Refrigerator removal and installation should be
performed by a qualified service technician.
Before removing the refrigerator:
1. Verify that the 120 VAC power cord is discon-
nected at the rear of the refrigerator.
2. Verify that the 12 VDC leads are disconnected
and capped at the rear of the refrigerator.
3. Shut off the gas supply.
4. Disconnect and cap the LP gas line at rear of
refrigerator.
Always use a backup wrench when loosing
and tightening LP gas connections.
Always use a backup wrench when loosing
and tightening LP gas connections.
To remove the refrigerator:
1. Remove the screws anchoring the refrigerator
to the enclosure.
2. Slide the refrigerator out of the compartment.
To replace the refrigerator:
1. Make sure the sealing strips (isolating the ap-
pliance combustion system from the vehicle
interior) are properly positioned for a complete
seal.
2. Slide the refrigerator back into the compart-
ment.
3. Replace the screws anchoring the refrigerator
to the enclosure.
4. Reconnect the LP gas supply line at the rear of
the refrigerator.
5. Check all connections for LP gas leaks.
6. Reconnect the 12 VDC leads at rear of refrig-
erator.
7. Reconnect the 120 VAC power cord at rear of
refrigerator.
Содержание CLASSIC RM 2620
Страница 2: ... 2 NOTES ...
Страница 42: ... 42 RM2351 RM2451 RM2551 RM2354 RM2454 RM2554 APPENDIX F WIRING DIAGRAMS ...
Страница 54: ......