EN
Mounting the extractor hood
Dometic CK400
22
➤
Place the fan on the opening and mark the six screw holes.
➤
Apply a thin ring of a permanently elastic sealing material around each
hole.
➤
Put the rubber seal (fig.
5
4, page 4) into the groove on the underside of
the fan.
I
➤
Attach the fan (fig.
5
3, page 4) with the six included bolts (4.2 x 25).
➤
Attach the roof hood (fig.
5
2, page 4) with the three included bolts
(3.5 x 9.5).
➤
Attach the cover cap (fig.
5
1, page 4) with the three included bolts
(4.2 x 13).
6.2
Mounting the extractor hood
!
➤
Choose a suitable installation location in the interior for the extractor
hood.
➤
Draw the location and size of the section of 381 x 142 mm on the bottom
of the suspended cabinet (fig.
4
, page 3).
➤
Pre-drill and cut out the section carefully with a keyhole saw or similar
tool.
➤
Insert the extractor hood from below into the cabinet and secure it with the
four included bolts (3.5 x 13) (fig.
6
, page 4).
➤
Attach the hose (fig.
6
3, page 4) to the extractor hood (fig.
6
5,
page 4) and the fan (fig.
6
1, page 4) with the hose clips (fig.
6
2 and
4, page 4).
➤
Insert the filter (fig.
2
1, page 3) into the extractor hood.
NOTE
Pull the fan on tightly enough that the rubber seal is seamlessly in
contact with the roof.
WARNING!
Attach the extractor hood preferably over the cooking zone
and install it in a a suspended cabinet.
The distance between the gas hob flame and the extractor
hood must be at least 50 cm.
Содержание CK400
