Dometic CAM360AHD, Руководство по установке

Страница: 20 / 412

EN
Installing the video system CAM360 AHD
20
A
I
Please note the following:
•
When working on the following cables, only use insulated cable terminals, plugs
and flat sockets:
–
30 (direct supply from positive battery terminal, acts as storage buffer for date
and time)
– 15 (connected positive terminal, behind the battery)
– 31 (return cable from the battery, earth)
– Reversing light
– Left/right indicators
Do
not
use porcelain wire connectors.
• Use a crimping tool (fig.
2
7, page 4) to connect the cables.
• Screw the cable when connecting cable 31 (earth)
–
using a cable terminal and serrated washer to one of the vehicle's earth bolts
or
– screw the cable to the bodywork using a cable terminal and a self-tapping
screw
Ensure there is a good earth connection.
If you disconnect the negative terminal of the battery, all data stored in the volatile
memories will be lost.
•
The following data must be reset, depending on the vehicle equipment options:
–
Radio code
– Vehicle clock
– Timer
– On-board computer
– Seat position
You can find instructions for making these settings in the operating manual.
NOTICE! Damage hazard
• The system may only be permanently installed after a successful test
calibration.
• Before drilling or screwing, ensure that the respective cable lengths
are long enough.
• To prevent damage when drilling, ensure there is sufficient space on
the other side for the drill head to come out (fig.
3
, page 5).
• Deburr all drill holes and treat them with a rust-protection agent.
NOTE
If installing the camera alters the vehicle size specified in the vehicle doc-
uments, your vehicle must be inspected by the appropriate authorities.
This authority must note any such changes in your vehicle documents.
CAM3601_INM_EMEA16.book Seite 20 Montag, 20. April 2020 8:45 08