6
5
6
7
8
8
Once all the AirPoles have sprung outwards assuming
their correct shape, detach the pump from the tent
and tighten the outer valve cap on each inflation
point. It is important that these are tight to prevent
the seepage of air.
Inflate the lateral AirPole, to between 6-8psi, and
place between the AirPoles inside the tent (5).
Close all doors and entrances and check the
positioning of the corner pegs again. If necessary, re-
peg to ensure that the tent is taught.
Peg all the intermediate pegging points ensuring
that each side is straight (6).
If you are using the groundsheet, toggle it into the
base of the tent using the ‘O’ rings (7).
Thread the front and rear canopy poles through the
canopy sleeve (8), and connect to the ‘cups’ located
on the AirPole at each end of the pole sleeve.
More information https://www.caravansplus.com.au
