EN
CoolAir SPX1200C
Target group
5
Before installing the system, check that all the parts belonging to the scope of
delivery are present.
I
3
Target group
4
Intended use
The fastening frame is used for installing the compressor unit SPX1200C for the park-
ing cooler SPX1200 to the following vehicles:
•
Ford F-MAX
When fastening the fastening frame, use existing fastening points on the vehicle.You
do not need to drill new holes.
This product is only suitable for the intended purpose and application in accordance
with these instructions.
This manual provides information that is necessary for proper installation and/or
operation of the product. Poor installation and/or improper operating or mainte-
nance will result in unsatisfactory performance and a possible failure.
4
Bolt M8 x 35
2
3 cm sealing tape (profile: 20 x 10 mm)
NOTE
The components to fix the compressor unit to the fastening frame are
included in the compressor unit‘s scope of delivery.
The mechanical and electrical installation and setup of the device must
be performed by a qualified technician who has demonstrated skill and
knowledge related to the construction and operation of automotive
equipment and installations, and who is familiar with the applicable reg-
ulations of the country in which the equipment is to be installed and/or
used, and has received safety training to identify and avoid the hazards
involved.
Quantity
Description
Содержание 9600011574
Страница 60: ...RU CoolAir SPX1200C 60 documents dometic com 1 1 1...
Страница 61: ...RU CoolAir SPX1200C 61 I 0 C 1 2 I 40 A 2 A...
Страница 63: ...RU CoolAir SPX1200C 63 Dometic 5 A I 1 1 2 3...
Страница 65: ...RU CoolAir SPX1200C 65 6 dometic com dealer...