EN
Instructions before installation
Heki2
6
6
Instructions before installation
➤
Before installation, check the roof thickness of your vehicle. Consult the vehicle
manufacturer if you have any questions.
➤
When choosing the installation location, observe the following:
– Adjoining components (roof rack or attachment and reinforcing parts), cables
and cabinets in the vehicle interior must not get damaged when sawing the
hole.
– Sufficient space needs to be available for installing the inner and outer frames.
– Only fit the roof light on flat and parallel interior and exterior roof areas with a
maximum inclination of 15° to the horizontal.
– You may use an existing roof hole provided the roof light fits into it.
– You can fit the roof light sideways (hinge-side at front in direction of travel) or
lengthways (hinge-side on left or right in direction of travel).
6.1
Pressing out the hole
See fig.
2
6.2
Using the reinforcing rails
Supplementary to fig.
3
➤
Before installation, check whether the roof hole needs reinforcing.
➤
Remove the foam according to the width of your reinforcing rail (not in scope of
delivery) (
A
).
➤
Fit the reinforcing rails (
B
).
Heki2-IO-16s.book Seite 6 Montag, 28. November 2016 8:56 20
“More information https://www.caravansplus.com.au"
