3
GENERAL INFORMATION
REQUIRED TOOLS
Scissors
Mallet
BASIC COMPONENTS
(1) Stowage Bag
(1) Screen Room Fabric Assembly
(1) Sectioned Central Roof Pole
(2) Extendable Side Roof Poles
(1) Sectioned Arch Pole
(2) Sectioned Vertical Corner Poles
(25) Tent Stakes
(2) Hold Down Straps
(1) Mesh Camper Skirt
(1) 25-Foot Roll of Velcro (“hook” side only)
(12) 3-Inch Pieces of Velcro
(“hook” side only)
(6) Turnbuckles
OPTIONAL COMPONENTS AND KITS
Velcro Kit
INITIAL ASSEMBLY
A. Assembling For The First Time
The following steps need to be completed only when installing the Screen Room for the first time .
STEP 1
Top Of
Camper Wall
Turnbuckle
(Optional)
Velcro
Locations
• Lower the camper wall enough to reach its top edge .
• Secure Velcro to the top of the camper wall .
• Secure the 3-inch Velcro strips or turnbuckles to the side of
the camper as indicated . Use the camper skirt for position-
ing the Velcro .
The locations shown are guidelines . If you are using Velcro,
use enough to securely fasten the camper skirt to your
camper .
STEP 2
Velcro
Camper
Screen
Room
Fabric
• Use the roll of Velcro to cover the top edge of the camper
folding wall . Trim the excess Velcro with scissors .
• Secure the Screen Room fabric to the Velcro from the peak
of the folding wall to the bottom corners .
• Raise the camper wall into position with the Screen Room
fabric pulled to the outside of the camper .
