Dometic 3317114, Руководство по установке

Страница: 5 / 8

5
EN
Wireless Receiver Pairing the Remote Control
6 Pairing the Remote Control
The power awning remote control must be paired with
the receiver to communicate. The pairing steps may vary
depending on the awning model. Follow the pairing
instructions for your awning model.
6 .1 Pairing the 9200 and 9500
Remote Control
Follow the steps below for the 9200 and 9500 awning
series only.
I
Complete each pairing step within four seconds
of the previous step to keep the receiver in pairing
mode. If the receiver resets, restart the pairing
process.
Step Operation
Audible
Alert
Awning
Movement
1
Remove battery
cover from back of
remote
None None
2
Turn the receiver
Power button ON
Beep x1
None
3
Press Left P2
button two times
Beep x2
None
4
Press Up
1
button
one time
Beep x4
Awning jogs
5 Proceed immediately to “Verifying the Remote
Control” on page 6.
1
For the 9500 power awning, press the Down button at step 4
instead of the Up button.
6 .2 Pairing the 9100 Power Awning
Remote Control
Follow the steps below for the 9100 awning series only.
I Complete each pairing step within four seconds
of the previous step to keep the receiver in pairing
mode. If the receiver resets, restart the pairing
process.
Step Operation
Audible
Alert
Awning
Movement
1
Remove battery
cover from back of
remote
None None
2
Turn the receiver
Power button ON
Beep x1
None
3
Press Left P2
button two times
Beep x2
None
4
Press Up button
one time
Beep x4
Awning jogs
5
Press
Left P2
button one time
Beep x1 Awning jogs
6
Press Up button
one time
Beep x1
None